Brif Description:
The Escape Room Props Kits consist of 1pc pressure sensor,1pc vibration sensor,1pc controller,1pc 12V adapter.We can provide US/EU/AU/UK plug for selection about the adapter.
HOW TO USE IT(for owner)
1.Connect the red and black line from controller to 60KG magnet lock(Red to red,black to black).
2.Power on the controller,press the black pressure switch, don’t let it go and knock at the board which the vibration sensor is placed on,the vibration sensor will record your knocking times automatically,lastly please restart the controller to test.
3.Press the pressure switch dont let it go , knock the board correct times,the magnet lock will open.
4.How to reset it for the next player?
Two way for you,first one ,If the lock is open,Press the pressure switch and dont let it go , knock at the board for right times,the magnet lock will be locked.The second way,just power off the controller and restart it, it will be ok.
HOW TO PLAY FOR ADVENTURER?
It depend on the idea from escape room owner ,the adventurer trigger pressure switch as same time knok on the board which the vibration sensor placed on ,If Knocking times is correct, the magnet lock will open.
TIPS: HOW TO INSTALL THE PROPS?ABOUT PRESSURE BELT.Install it on the floor or on the wall.When the player presses it with his foot or presses it by hand,It will be triggered.Leaving it untriggered.ABOUT VIBRATION SENSOR.Install it on the door, on the wall or on the board, when knocking the door, wall, and board it is on (in) for a certain number of times (the number of times the owner of the chamber is preset), It will be triggered.