Plug in Box All Wires are Inserted into The Right sockets

Adventurers will find a metal box and 6 wires with plugs in the room. By figure out some puzzles, adventurers should find out the right way to insert these 6 wires into the box.
If all the wires are inserted into the right sockets, one lock will release. Otherwise, nothing will happen.

Details introduction
1.Adventurers will find a plug wire box and 6 wires in the room. On the both ends of each wire, there are two plugs which can be inserted into the sockets on the box.
2.After power on this prop, there will be one beep and one red pilot light will be light up.
3.By figure out some puzzles, adventurers should find out the right way to insert these 6 wires into the box.
Not all wires must be used which depends on the password set by room owner.
4.If all the wires are inserted into the right sockets, the pilot light will be light off and one lock will release with two beeps. Otherwise, nothing will happen.

How to reset?
Remove any one of the plugs from the right socket, the prop will be reset.
How to set the way of inserting plugs?
There is one red button hidden in the box which prevents adventurers from pressing it during the game. Room owner should open the box by using a screwdriver.
1) Hold pressing the red button and power on the box. You can let go of your hand when you hear 2 beeps.
2) Insert the plugs in the way which you want to set.
3) Press the red button again to save the configuration. You will hear 6 beeps if the configuration saved successfully.

Prop list
One plug box with 6 wires